| Description | Specification |
| Appearance: | Fine Paste |
| Specific Gravity: | 1.03gm/ml |
| Extrusion Rate (3.2 mm (1/8") orifice, 90 psi air pressure) g/minute: | 476 |
| Sagging ( mm ): | 0 |
| Flow Rate (sag or slump): | Nil |
| Stretching Bonding: | Nil |
| Tensile Modulus at 25°C (77°F) and 50% R.H: | 0.46 |
| Tack-Free Time at 25°C (77°F) and 50% R.H. : | 5-10 min |
| Cure Rate at 25°C(77°F) at 50% R.H. in 24 hour(mm): | 2.6 |
| Hardness Shore A, points: | 28 |
1.Used for all general purpose sealing and bonding;
2. Install and fix all kinds of window and door;
3. For architectural decoration, glass, aluminum, wood, brick, ceramic, etc;
4. Sealing and bonding other non-greese products.
5. Widely used in glass industry, aluminum industry, plastic industry, etc. ray.
Advantage & Features
General purpose & stable quality
Good adhesion to many materials such as glass,stone,marble,granite curtain-wall,ceramic,metals etc.
Good characteristics of room-temp curing and fast strong bonding
Excellent weather resistant performance, water proof
UV resistant, moisture resistant,excellent aging resistant
No corrosive to metals, marble,ceramics,concrete,stone and glazing glass etc.
How to Use
1.Make sure surfaces are clean and dry. Remove any soap, oil and grease.
2.Cut tip off cartridge, screw on nozzle. cut nozzle to desired opening at 45 angle.
3.For a smooth seal hold at 45 angle and apply bu pushing sealant ahead of nozzle.
4.If further caulking is required, complete within 5 mins, remove excess sealant immediately with dry paper towel cured plug.
Company Overview
Zhejiang Guoneng Technology Co., Ltd was establish from 1992. Over 20 years professional manufacture experience, we become one of the largest Manufacture on Adhesive in Huzhou City Zhejiang China.
Our company covers an area of 22,000 square meters, including 800 square meters of laboratory and we have over 200 employees. We specialize in the production and distribution of adhesive products,and they're well approved by SGS, Reach, RoHs, BSCI, ISO9001:2000 etc. OEM and ODM are both welcomed.
We'd like to cooperate with customers from all over the world based on mutual-benefit. We always put "Customers First" in our mind and commit ourselves to providing high quality HPPP (Honest, Prompt, Precise, Professional) service to all reliable and esteemed international partners and clients.
Certificates
After-Sales Service
Reply within 24 Hours
Professional consultation service is available within 24 hours after receiving your feedback regarding theiterms
that that you bought.
Global Insurance Service
Global insurance service guarantees the safety of iterms when installation and application.
Compensation Policy
Any quality problem caused by our company side with enough evidence, we promise you that if could bere-produced for free.
Contact us, you will get more than what you see !